Chapter 3: Characteristics
Printhead: 1pc (Epson DX5)
Resolution: 1440\1080\720DPI
Print mode: 3,4,6,8,12 Pass
Output mode
：
File or TCP/IP(Rip and Print at the same time)
Output preview
：
Convert prn/prt file into a small bmp file for previewing
Printhead usage: Able to turn on/off each printhead channel
Print intelligently
：
Skip white area
Muti-printing: Able to print single or different image continuously
Automatically flash jetting
：
Automatically clean printheads by flash jetting during printing
Home flash jet: Prevent nozzles from clogging while not in printing state
Color bar
：
Prevent nozzles from clogging, and observe nozzles status. Able to set the
width of color bar and the instance from image
Able to align printheads, step difference ,and bi-direction difference during printing
Printing direction: uni-direction to left, uni-direction to right, bi-direction
Edge feather: Lighten pass line
Cleaning System: auto-cleaning, no need to use tools (Syringe) to clean
Control Panel: use with control panel, it is more convenience
To Next Page
Loading...
General