Need help?Do you have a question about the GalaxySpas Rosa and is the answer not in the manual?
Specifies minimum thickness and support for a concrete spa foundation.
Covers power cable location, socket requirements, and RCD protection.
Details requirements for 25A+ spas, including qualified electrician and hardwiring.
Assemble and fit the cover lifter before the spa is filled.
Locate and connect the power cable inside the cabinet.
Ensure the spa has been hard wired by a registered electrician.
Fill the spa pool and prepare for air lock prevention.
Fill the spa to the recommended line and replace the filter.
Turn on power, allow priming cycle, and set time/filtration.
Add recommended chemicals once the spa reaches 30 degrees Celsius.
General| Dimensions | 84 x 84 x 36 inches |
|---|---|
| Number of Jets | 36 |
| Shell Material | Acrylic |
| Control System | Balboa |
| Warranty | 5 years |
| Number of Seats | 6 |
| Seating Capacity | 6 |
To Next Page