Technical specifications
Power supply Value
Input voltage 90 - 250 V AC
Output voltage Primary 13.8 V
Output current 3.5 A
Power rating 51.38 W
Battery low and mains failure outputs Normal state 2.5 V
Alarm state 3 V
Temperature range -10 °C to 50 °C (14 °F to 122 °F)
Controller Value
Voltage 9 Vdc - 16 Vdc
Current without devices connected 110 mA
Maximum current per RS485 port 750 mA
Temperature range -10 °C to 70 °C (14 °F to 158 °F)
Humidity 0 - 95% non-condensing
10/100BaseT Ethernet port 1 x 10 Mbs/100 Mbs
I/O boards Value
8In Board operating current 50 mA DC (all inputs terminated with 4k7 resistors)
8In Board power rating 0.68 W
8In 4Out Board operating current 45 mA DC (relays OFF)
200 mA DC (relays ON)
8In 4 Out Board power rating 0.61 W (relays OFF)
2.72 W (relays ON)
Fuse Onboard 1 A resettable polyfuse
Reader Value
Voltage 9 Vdc - 16 Vdc
Current Idle
1
Maximum
2
T11 at 9 Vdc 106 mA 176 mA
T11 at 13.6 Vdc 80 mA 142 mA
T15 at 9 Vdc 110 mA 168 mA
T15 at 13.6 Vdc 81 mA 136 mA
T30 at 9 Vdc 130 mA 241 mA
T30 at 13.6 Vdc 87 mA 160 mA
To Next Page
Loading...