Gallagher eShepherd - Overview of the Eshepherd Setup

Page 
Please follow to the instructions for:
Base Station Installation
□ Base Station(s) installed and powered on.
□ Base Station GPS co-ordinates documented.
□ Confirm cellular connection using signal LEDs on router.
Neckband Preparation
□ Unpack neckbands, charge and un-hibernate.
□ Check Web App to confirm neckband communications.
□ Confirm all neckbands are flashing green.
Neckband Fitment to Animals
□ Watch neckband fitment training videos.
□ Neckbands fitted to animals.
Neckband assignment to Animals
□ Associate the neckband to the animal using an RFID/EID reader and the eShepherd Mobile App.
Introducing Animals to eShepherd
□ Animals released to training paddock.
□ Animals settled and calm.
□ First virtual paddock activated.
□ Animal training period completed successfully (7-0 days).
Overview of the eShepherd Setup
A Gallagher eShepherd representative assists you through:
Customer Onboarding and eShepherd System Preparation
□ Welcome to eShepherd and discuss eShepherd application at your property.
□ Confirm cellular / mobile data coverage on the property.
□ Estimate LoRa communication coverage.
□ Determine suitable / accessible Base Station location(s).
Access to the Web and Mobile App
□ Customer registration to the eShepherd Web App (all users).
□ Mobile App installed and access confirmed.
Web App Introduction
□ Brief introduction to the Web App completed.
□ Introduction to the Resource Centre.
□ Physical boundaries and physical fences defined or uploaded.
□ Watering points defined.
□ Animal training discussed.