Do you have a question about the Galletti LCA Series and is the answer not in the manual?
Essential general information and safety warnings for handling the chiller unit.
Procedures for inspecting, lifting, and moving the unit safely.
Guidelines for unpacking the unit and selecting an appropriate installation site.
Specifies minimum air clearances around the unit for proper operation and access.
Best practices for connecting water circuits, including components and safety valves.
Critical safety and compatibility checks for electrical hook-up.
Wiring details for flow switches, pumps, and remote controls.
Essential checks to perform on valves, electrical connections, and leaks before operation.
Step-by-step guide for starting the chiller after all checks are complete.
Monitoring operational parameters and verifying the refrigerant charge.
Correct procedure for safely shutting down the chiller.
Specifies the acceptable ranges for water and air temperatures for unit operation.
Details on factory settings for various control and safety devices.
Explanations of pressure switches, thermostats, and timers.
Periodic checks to ensure the unit is functioning correctly and efficiently.
Procedures for fixing issues in the cooling system, including tightness and charging.
Methods for vacuuming the circuit and correctly charging with R407C refrigerant.
Guidelines for refrigerant handling and disposal to comply with regulations.
Procedures for safely decommissioning and disposing of the unit at its end-of-life.
Identifies common unit faults and provides corrective actions for diagnosis.
Diagrams illustrating physical dimensions and component layouts of the unit models.
Graphs detailing water pressure drops for various flow rates and temperatures.
Information on available water pumping configurations and storage system capacities.
| Refrigerant | R410A |
|---|---|
| Power Supply | 400V 3Ph 50Hz |
| Application | Commercial air conditioning |
| Compressor Type | Scroll |
| Control System | Microprocessor control with user-friendly interface |
| Dimensions (LxWxH) | Varies depending on model, consult product documentation |
| Weight | Varies depending on model, consult product documentation |