Need help?Do you have a question about the Galletti LCA 080 and is the answer not in the manual?
Check the unit for damage upon receiving it and report any issues immediately.
Ensure adequate air volume around condenser coils by maintaining specific clearances on all sides for proper operation.
Connect the incoming water supply correctly to the "Water Inlet" to prevent freezing and ensure proper function.
Ensure proper and safe electrical connections are made according to the wiring diagram and regulations.
Perform essential checks before starting, including valve status, electrical connections, and refrigerant leaks.
Step-by-step procedure for starting the chiller, including control panel operations and safety checks.
Procedures for verifying the refrigerant level using the liquid level indicator and pressure gauges.
Instructions on how to properly stop the unit using the front panel controls to protect the compressor.
Manually reset type that stops the compressor when discharge pressure exceeds the set value.
All maintenance operations must be performed by qualified personnel, with safety precautions observed.
To Next Page
General
