Need help?Do you have a question about the Gallien-Krueger 700RB/115 and is the answer not in the manual?
General| Brand | Gallien-Krueger |
|---|---|
| Model | 700RB/115 |
| Category | Amplifier |
| Language | English |
Welcomes the user and expresses satisfaction with their purchase.
Lists the accessories included with the amplifier head and combos.
Ensures correct voltage, amperage, and circuit capacity for safe operation.
Covers safety warnings regarding cord handling, enclosure, and electrical hazards.
Provides guidance on unpacking and handling the unit and its accessories.
Connects the amplifier to a power outlet, referencing safety information.
Guides on connecting speaker cabinets to the correct outputs, noting load limits.
Sets initial positions for EQ, Boost, Level, and Master volumes for basic operation.
Connects the bass guitar to the input jack and sets active/passive tone controls.
Adjusts input and master volumes to achieve a desired sound level and avoid clipping.
Tips on using Volume and Woofer-Master for optimal sound and level.
Details the setup for Bi-Amp operation using RBH cabinets and a 4-conductor Speakon cable.
Explains setup for normal operation using standard speaker cables and passive crossovers.
Guidance on using the active EQ for fine-tuning tone with small adjustments.
Explains how Contour scoops mids and boosts highs/lows for a unique GK sound.
Details the String Bass button's function for 5-string basses or specific 4-string voicings.
Tips on using Boost for growl and adjusting Master for desired tone and volume.
Explains the low-noise direct out for PA/recording, including Pre/Post EQ options.
Suggested amplifier settings for achieving a 'Slap' bass tone.
Suggested amplifier settings for a 'Rock' bass tone.
Suggested amplifier settings for a 'Reggae' bass tone.
Suggested amplifier settings for a 'Jazz/Fusion' bass tone.
Proper placement, ventilation, and rack mounting instructions for optimal operation.
Recommendations for cleaning the unit without damaging its finish or components.
Information on amplifier durability and the use of road cases for protection.
Instructions to safely disconnect and prepare the unit before moving.
Details input jack, -14dB pad, clip LED, tuning mute, volume, and level controls.
Explains voicing filters, contour, presence, EQ bands, and boost for tone customization.
Covers direct out, effects loop, tuner output, woofer/tweeter masters, and crossover.
Describes the Power/Protect LED behavior and the function of the power switch.
Location for connecting the detachable power cord.
Full-range output for connecting cabinets, specifying load limitations.
Enables Bi-Amp operation and connects to RBH series cabinets.
Warnings against improper Speakon cable use and connecting amps to the same speaker.
Details the speaker arrangements for different combo models (115 and 210).
Explains maximum power output and recommended loads for combos with/without extension cabinets.
Instructions on how to engage and disengage the combo's transport system.
Guidance on using the 'Rock Back' position for monitoring or upright for projection.
Highlights features like high current power supply, Bi-Amp, EQ, and cooling.
Explains the amplifier's high current capacity and its effect on bass response.
Details the benefits of Bi-Amping for separate woofer and horn signal control.
Describes the electronic crossover's function and its advantage over passive crossovers.
Discusses the unique design and effectiveness of the GK four-band active equalizer.
Details the Voicing Filters, Contour, and String Bass controls for tone shaping.
Explains the low-noise input stage and its benefit for hiss reduction.
Describes the Gate Induced Valve Effect technology for harmonic content.
Explains the dual-rail power supply and fan cooling for reliability.
Details the amplifier's protection circuits against faults and unsafe conditions.
Information on using 4-conductor Speakon cables for Bi-Amp operation.
Provides a visual representation of the amplifier's signal flow and components.
Lists output power for different impedances for the 1001RB-II and 700RB-II.
Details maximum input level, impedance, and output impedances for various jacks.
Provides frequency and type details for each band of the graphic equalizer.
Specifies cooling method (fan) and amplifier protection features.
Lists the physical dimensions and weight of the amplifier.
Details power consumption for different regions (USA, Europe, Japan).
To Next Page