Via Lago di Lavarone, 14 Tel. +390445576205
36015 Schio (Vi), Italy Fax +390445500026
Cap.soc. Euro 90.000,00 www.gamitaly.com
C.F./P.I. 00932420243 gami@gamitaly.com
R.I. di Vicenza 00932420243 e al R.E.A. al N. 283138
1.1.8 Doser
The doser operates by temporarily stopping the auger to introduce the mould,
perform a timed pouring operation and stop the auger for removing the mould.
This function can be activated by using the special push-button with LED located
on the panel. The LED that lights up on the push-button indicates the state of
enablement.
This shows how the function works when it is enabled:
1) When the pedal is pressed, the auger stops for the length of time set in the
machine parameters.
2) The auger switches on again for the length of time equal to the dosing time
set on the front panel.
3) The auger stops again for the length of time set in the parameters.
4) The auger switches on again normally.
By pressing the doser activation button for 3 seconds, the display will view the
number of set doses that can also be altered as wished and recorded by pressing
the doser activation button again or by waiting 5 seconds.
To Next Page
Loading...