Installation and Operation Instructions
25
Figure 18. Squeezing the spacers with pliers.
Figure 19. Fixing clamps in gutters.
Route the cable along the gutter using cable spacers. When routing the cable
in the groove, the spacers can be tightened with your fingers or pliers. If you
use pliers, gently squeeze and be careful to avoid crushing, crimping, cutting, or
otherwise damaging the cable.
Do not use a hammer to tighten clamps and spacers.
To fasten the cable in the gutter along the roof line, use the clamps, securing
the cable to the bottom of each drop loop that you have formed.
To Next Page
Loading...