Gammill PLUS User Manual

PLUS MACHINE MANUAL

Gammill PLUS Specifications

General

Brand	Gammill
Model	PLUS
Category	Sewing Machine
Language	English

Summary

Plus™ Stitch Regulation

Controls

Details the components of the Plus Control Center display unit, including LCDs and switches.

Indicators

Explains the meaning of various lights, sounds, and messages indicating system status.

Stitch Regulation (Automatic Mode)

Describes how to set and operate the machine in automatic stitch regulation mode.

Constant Speed (Manual Mode)

Explains how to set and operate the machine in manual mode with constant motor speed.

Thread Break Detection

Details the sensor and alerts for detecting top thread breakage during operation.

Low Bobbin Sensing

Explains the system for monitoring and alerting low bobbin thread levels.

Needle Positioning

Describes the function and operation of the needle position control switch.

Troubleshooting Encoder Problems

Provides steps to check and diagnose issues with encoder operation.

Regulated Stitch Electrical Adjustments

Outlines how to enter set-up mode for electrical adjustments on the machine.

Reset Bobbin Count

Explains how to check and reset the bobbin counter value for accurate tracking.

Motor Run-Time Clock

Describes how to access and view the total operating hours of the machine's motor.