CUSTOM BY USER. STBY SETUP. This section will help
you set the Sleep mode. We recommend you to use
Auto STBY.
U – the device wakes up depending on the voltage. As a
rule voltage from the generator is higher with the
engine running than voltage from the battery when the
engine is off.
S – the device wakes up from the signals on the wires.
LED INDICATION. You can switch on/off the LED
indicators of the operating mode in the Settings menu.
If flashing distracts you after installation of GÄN GA+
LED, we recommend you to switch this function off.
17
To Next Page
Loading...