HOLD more the 5 seconds – LED is solid blue, yellow,
red within 5 seconds. The device goes back to Default
setup and calibration resets. Vehicle specific settings
won’t be deleted.
Used for:
1. A full device reboot and secondary adaptation to the
vehicle.
2. In case your device doesn’t get out of the Sleep
mode when the engine is running.
3. Installation on another vehicle.
SINGLE CLICK in the STBY mode (for GÄN GA+
only)- LED is solid blue. Single click forcedly activates
Bluetooth for a period of 30 seconds. It enables you to
connect to the device in Sleep mode via Smartphone
and change any available settings.
FUNCTION OF THE RESET BUTTON
19
To Next Page
Loading...