GÄN GA - Operating and Indication Modes

18
DEVICE HAS NO DATA INSTALLED FOR A SPECIFIC
VEHICLE – LED is solid blue, yellow, red.
OPERATING MODE – LED is solid yellow. Your device
goes into the “soft indication” mode after one minute
and brightness decreases down to 50%. You can switch
the indication off via PC or Smartphone.
STBY MODE (SLEEP MODE) – LED is flashing yellow.
CALIBRATION MODE – LED is flashing red.
DATA EXCHAGE VIA BLUETOOTH (GÄN GA+ only) –
LED is flashing blue.
USB CONNECTION – LED is solid red.
OPERATING MODES AND INDICATION