Console module »DP-HR-CON-MC2«
93 · Computer and console modules (DP-HR)
Console module »DP-HR-CON-MC2«
With DP-HR-CON-MC2 console modules, you can connect a dual-monitor console (two
DisplayPort monitors, keyboard, mouse and audio devices) to a digital matrix switch
of the ControlCenter-Compact or ControlCenter-Digital series.
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
When using the console to access a computer module DP-HR-CPU-MC2 connected to a
dual-head computer, the monitors display the separate images of the graphics out
-
puts.
When accessing a computer module with one graphics input only, only the first
monitor displays an image.
Package contents
1 × Console module DP-HR-CON-MC2
1 × Power cable
1 × »Manual information« flyer
1 × »Safety instructions« flyer
Required accessories
2 × Category 5e (or better) twisted pair cables to connect the console module to a
KVM matrix switch
ADVICE:
Instead of an MC2 computer module, you can also connect a dual-head
computer by using two separate computer modules
DP-HR-CPU.
In this case, add both computer modules in the web application to channel group.
To Next Page
Loading...
Need help?
General
