G&G WatchBot - Run the Watchbot Camera Tool Software; Setting up Your Camera on Your Local Area Network (LAN)

To Next Page

To Previous Page

WatchBot Home Security Camera - User Guide

1.4 RuntheWatchBotCameraToolSoware

The IP Camera Tool icon will have appeared on your Computer Desktop. Double-click the icon

to run the camera soware.

A dialogue window will appear similar to the one shown below. You should see your camera

listed and it’s assigned Local IP (Internet Protocol) Address. This is usually takes the form of

192.168.0.X or 192.168.1.X. If no camera(s) are listed, or you see any other error message,

pleasegotoSecon5-FAQs,formoredetails.

Note: The auto-assigned IP Address may change each me the camera is rebooted or

powered on/o. For details of how to x the IP Address of you camera for more convenience,

please consult pages 34 and 35 in Appendix A.

Note: Right-clicking on the entry above will give access to a context menu for funcons

described in detail later in this manual.

1.5 SengupyourWatchBotcameraonyourLAN

Note: This Quick Setup Guide assumes you are using Microso Internet

Explorer web browser. Other browsers will work for viewing the camera’s

live video feed, however less features will be available. Please upgrade

your browser to the latest version of Internet Explorer available to you.

Using another browser? Please see Secon 4.

Before your camera can be accessed via the Internet, it needs to be setup on your LAN.

Double-click on the camera lisng as shown above in the WatchBot Camera Tool soware.

Aer a short me, a Log In window will appear as shown overleaf.

As we have not yet set up any extra Administrators or Users, log in with admin/nopassword.