Gap Diagnostic IIDTool - Installing Interfaces; Installing the Integrated Interface; Installing the Application (App) Iidcontrol; Installing the Mobile App

To Next Page

To Previous Page

6 7

IIDTool

3 Installing Interfaces

Purpose

Being able to interact with and control the IIDTool

Principle

Depending on the model of IIDTool or preference, proceed with installing the selected interface.

3.1 Installing the Integrated Interface

No installation operation is required. The interface will be accessible automatically when connecting

the tool to the vehicles OBDII connector.

3.2 Installing the Application (App) IIDControl

The IIDControl App can be used with an IIDTool BT

Prerequisites

• Own at least one supported mobile device

• Have access to an internet service

Installing the mobile App

Download (free) the IIDControl App from Apple App Store or Google Play Store in each mobile device.

BeforeusingtheApp,theleswillhavetobesynchronizedwiththecurrentIIDToolrmware.

Synchronizing the Mobile Application (BT)

Purpose

Loadtherequiredlespriortorstusage.

Prerequisites

• Having access to a PC or Mac personal computer or a USB power source.

• Own a compatible mobile device (see the user manual) connected on the internet.

• The IIDControl App is installed and up-to-date

Steps

1- Connect the IIDTool BT on the USB port.

2- Launch the mobile Application IIDControl in the mobile device.

3- Click on “ Search for tool ”.

4- Selectthetoolin“Bootloader”.Fortherstsynchronization,lltherequiredelds.

5- Waitwhilealldatalesaredownloaded:theword“Loaded”indicatescompletion.

6- Exit the application by pressing “Disconnect”.

7- Repeat previous steps for each mobile device that may be used with the tool.

8- Unplug the IIDTool from the computer or USB supply.

Transfer of ownership guide,

Other manuals for Gap Diagnostic IIDTool