Gap Diagnostic IIDTool - Activating; App, Activation Using the Mobile App

To Next Page

To Previous Page

10 11

IIDTool

5 Activating

Prerequisites

• Have access to the vehicle on which the IIDTool will be used

• Ensuring that the vehicle is in a safe environment

• Having purchase a transfer of ownership

5.1 App, Activation using the mobile App

Steps to activate the IIDTool using the App

1- Turn ignition ON without starting the engine (turning the key to “ON, II” or press the “start en-

gine” button without simultaneously pressing the brake pedal).

2- Insert the IIDTool in the vehicle’s OBDII connector

3- Wait 30 seconds until the “ IIDTool Ready ” message is displayed on the instrument pack screen.

This delay is caused by the scan process that detects which ECUs are present.

4- Launch the Mobile Application IIDControl already installed on your compatible mobile device

5- Press “Search for tool” at the bottom of the screen

6- Select the desired tool available in the list (“Available Devices”). If only one device is discove-

red, the App will automatically connect to it.

Figure 6. App : Activation -

tool selection

Transfer of ownership guide,

Other manuals for Gap Diagnostic IIDTool