Gard Pro ULTRA - Heart Rate Monitoring


i.
ii.
iii.
i.
ii.
iii.
iv.
i.
ii.
iii.
By default, the Gard Pro Ultra continuously monitors heart rate for 24 hours.
You can turn this feature on or off in the GloryFit app. To use the heart rate
monitor on the Gard Pro Ultra, follow these steps:
c. Enable call notifications via Vibrate:
b. Enable text message notifications via vibration:
a. Getting incoming calls visible:
ULTRA
PAGE 06
7. CALLING AND APP MESSAGES
8. HEART RATE MONITORING
Make sure the Gard Pro Ultra is worn securely and in contact with your wrist.
Swipe from the main interface to the heart rate interface.
The Gard Pro Ultra will automatically begin measuring your heart rate. Wait
for the measurement to complete.
The heart rate reading will be displayed on the screen.
i.
ii.
iii.
iv.
At the bottom of the GloryFit app, go to ''Device''.
Select ''Phone.''
When both bars turn green, you can take and make calls.
At the bottom of the GloryFit app, go to ''Device''.
Select ''App.''
Then press the individual apps you want to receive notifications from on
your GARD PRO.
When the bar turns green your messages will receive notifications.
From the home screen, swipe down and select settings.
Select ''Sound Setting'' to turn silent mode on or off.
When the bar is green silent mode is on.
Note: If this does not work go to your phone's settings and find the app
GloryFit. Then check that you have given permission to receive messages.
Also check per app if the 'show preview' is set to 'always'.