15
GB
Manual operation:
Only for the
submersible pumps:
Flat suction /
Normal operation
The pump remains in operation continuously. The ON
sensor
3
is locked in manual position and bridged via the
contact
7
.
1. Push OFF sensor
4
and ON
sensor
3
right down so that the
ON sensor
3
touches the
contact
7
.
2. Stand the pump on a firm surface
– or –
use a rope attached through
the bore hole in the carrying
handle
5
to immerse the
pump in a well or shaft.
3. Plug the power cable
6
into a mains socket.
Flat suction: Normal operation:
v Turn the 3 swivel feet
8
v Turn the 3 swivel feet
8
180° to 1mm. 180° to 5 mm.
The residual water level of approx. 1 mm is only reached during
flat suction in the manual operation mode.
5. Putting into Storage
v Store the pump away from frost before the first frost sets in.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
8
3
7
4
4
3
6
5
Frost-free storage:
Disposal:
(in accordance with
RL2002/96/ EC)
To Next Page
Loading...
