EasyManua.ls Logo

Gardena C 1060 Profi - Programs cannot be entered; Manual operation issues; Watering program not running

Gardena C 1060 Profi
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
104
GB
Fault Possible Cause Remedy
No display appears Temperature on the display Display appears after
is higher than 60 °C. temperature has dropped.
v Check function by operating
manually. (man. On/Off).
Programs cannot be The current time and the day v Enter time and day of week
entered of the week were not entered (see 5. Programming).
completely.
Manual opening via the Low battery power, Batt. v Insert new (alkaline) battery
man. On/Off-key is not indicator flashes
possible
Manual watering period is set v Set manual watering period
to
00
::
0000
. to a figure greater than
00
::
0000
(see 5. Programming).
Tap turned off. v Turn tap on.
Watering program is not Watering program has not v Read off watering program
being undertaken been entered completely. and modify if necessary.
(no watering)
Programs deactivated v Activate program
(Prog. Off). (% Run-Time).
Program entry/modification v Make program entry/
during or just before the modification outside the
start pulse. programmed start times.

Related product manuals