EasyManuals Logo

Gardena MultiControl duo User Manual

Gardena MultiControl duo
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
26
EN
Clean filter :
Disposal:
(in accordance with
Directive 2012/ 19/EU)
Disposing of flat batteries:
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
v Please return flat batteries to a GARDENA dealer or dispose
of them properly at your nearest recycling centre.
Only dispose of batteries when they are flat.
7. Maintenance
The filter
N
should be checked regularly and cleaned when
necessary.
1. Unscrew sleeve nut
I
of the Water Computer by hand
from the tap thread (do not use pliers).
2. If necessary unscrew the adaptor
H
.
3. Remove filter
N
from sleeve nut
I
and clean.
4. Fit the Water Computer again (see 4. Putting Your Water
Computer into Operation
Connecting Water Computer
).
8. Troubleshooting
Fault Possible Cause Remedy
No display appears Battery inserted incorrectly. v Check polarity markings
match (+/).
Flat battery. v Insert new alkaline battery.
Temperature on the display Display appears after
is higher than 60 °C. temperature has dropped.
Manual watering is not Battery flat (frame is flashing). v Insert new alkaline battery.
possible using the
Manual watering period is set v Set manual watering period
Man. button
to
0
:
00
. to a figure greater than
0
:
00
(see 5. Programming).
Tap turned off. v Turn tap on.
Watering program is Watering program has not v Read off watering program
not carried out out been entered completely. and modify if necessary.
(no watering)
Programs deactivated v Activate program
(Prog.
OFF
). (Prog.
ON
).
Program entry/modification v Make program entry/
during or just before the modification outside the
start pulse. programmed start times.
Valve was opened manually v Avoid possible program
previously. overlaps.
Tap turned off. v Turn tap on.
Soil moisture or rain sensor v If dry, check setting/
registers damp (wet). location of soil moisture/
rain sensor.
H
I
N

Other manuals for Gardena MultiControl duo

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gardena MultiControl duo and is the answer not in the manual?

Gardena MultiControl duo Specifications

General IconGeneral
Power SourceBattery
DisplayLCD
Manual OperationYes
WeatherproofYes
Number of Outlets2
Battery Type9V alkaline
Operating Pressure0.5 to 12 bar
Tap Connector3/4"
TypeWater Timer
Battery LifeApproximately 1 year
ProgramsIndependent programming for each outlet

Related product manuals