AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
MODEL: GLPC 41 PRODUCT CODE: 64055 04/2016
41cc Petrol Chainsaw (Assembled)
Quick start guide
Read the safety instructions in the user guide before you start.
1. Pack contents/parts
NOTICE!
This quick start guide is intended for experienced users. Please refer to the main Instruction Manual
for further details.
NOTICE!
Diagram numbers refer to those in the main Instruction Manual. Please refer to the main Instruction
Manual if you are unsure.
2. Explanation of the symbols and types of instructions used
1
Read the user manual before using the machine.
2
On all jobs performed with the saw you must always wear safety
goggles to guard your eyes from fl ying materials/objects and a sound-
proof helmet, ear plugs or the like to protect your hearing. Wear a
safety helmet if there is a risk of objects falling on you from above.
3
Wear gloves to protect your hands.
4
Wear safety shoes to protect your feet.
5
Warning! Danger!
6
Make sure that the chain brake is released.
Pull back the handle/chain brake before operating.
7
Noise emission complies with Directive 2000/14/EC!
Continued
overleaf...
Fig. 1
17
1 2 4
17 10 115 6 7 9
13
23
3 4
12 14
16
18201915
8 2421 2522
1
Chain bar
2
Saw chain
3
Chain tensioning wheel
4
Spiked bumper
5
Chain brake lever/front hand guard
6
Front handle
7
Starter handle
8
Screwdriver (oil pump adjusting)
9
Air filter cover
10
Stop switch
11
Safety lock
12
Oil tank cap
13
Fan housing
14
Fuel tank cap
15
Rear handle/bootstrap
16
Chain guard
17
Choke (carburettor setting)
18
Bar fastening knob & lever
19
Throttle lever
20
Chain catch
21
Fuel mixing bottle
22
Spark plug spanner
23
Fuel pump 'primer bubble'
24
Original operating & safety instructions
25
Quick set-up guide
Fig. 2
1 2 3 4
5 6 7
Explanation of the pictograms for handling on the machine (Fig. 2)
A safety sign is fi tted to the chainsaw's fan fi lter cover. This label, along with the safety
instructions on these pages, should be carefully read before attempting to operate this unit.
DANGER!
1. RED: Warns about a dangerous method of working that must not be used.
2. GREEN: Recommended operation for safe sawing.
Recommended operation for safe sawing
DANGER!
1
Beware of recoil.
2
Do not hold the saw in one hand.
3
Avoid any contact with the tip of the rail (chain return point). RECOMMENDED!
4
Hold the saw fi rmly with both hands. Place your right hand on the rear handle and your
left hand on the front handle.
Fig. 3
1 2 3 4
64055_4501826_11025_qsg.indd 1 17/11/2015 12:57 p.m.
To Next Page
Need help?
General
