Need help?Do you have a question about the Gardenline GY9600 and is the answer not in the manual?
General| Brand | Gardenline |
|---|---|
| Model | GY9600 |
| Category | Chainsaw |
| Language | English |
Read all instructions, keep the manual safe, and understand intended and prohibited uses.
Always wear safety face shield/goggles, snug clothing, gloves, and boots with steel toe caps.
Stay alert while operating. Learn kickback prevention techniques like firm grip, proper footing, and avoiding tip contact.
Loosen guide bar nuts, then adjust tension screw. Check tension by pulling chain; it should be snug but movable.
Understand kickback causes and implement safety measures like firm grip, proper footing, and avoiding bar nose contact.
Ensure chain brake and overload switch are set. Depress trigger and safety lock-off simultaneously to start.
Plan a retreat path. Avoid felling into people, power lines, or property. Stay uphill from the falling tree.
Make a notching undercut and a felling back cut at least 2 inches higher, leaving a hinge for controlled fall.
Cut logs into lengths, ensuring firm footing. Use overbuck or underbuck cuts based on log support.
Always wear protective gloves. Use only manufacturer-approved parts to avoid injury and poor performance.
Disconnect power, wear gloves, ensure tension. Use a round file at 35° horizontal and 90° to the bar.
Addresses problems like the motor not running, saw not cutting, or slow/stalling operation due to switch, chain, or voltage.
To Next Page
