Gardner Bender GCM-221 - Specifications

2 3
2. Specications
Ranges: Autoranging
AC Voltage: 600 Volts
AC Current: 600 Amps
Resistance (Ohms): 200 Ohms
Accuracy: AC voltage +/- 1.5%
AC current +/- 2.0%
Resistance +/- 1.0%
Function/Range switch: 4 functions
4 positions
Sample Rate: 2 times / sec
Operation Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 14°F - 140°F (-10°C - 60°C)
3
1
⁄2 Digit LCD Display
Recessed Input Jacks: Negative (-) input jack for black test lead,
positive (+) input jack for red test lead.
Batteries: Two 1.5V AAA (non-rechargeable) batteries
Dimension: 187 mm x 67 mm x 31.5 mm
Weight: 180g (Battery Excluded)
Important:
Read this operators manual thoroughly before using this meter.
This manual is intended to provide basic information regarding
this meter and to describe common test procedures which can
be made with this unit. Many types of appliance, machinery,
and other electrical circuit measurements are not addressed
in this manual and should be handled by experienced
service technicians.
!
WARNING
Use extreme caution when using this meter.
Improper use of this meter can result in severe damage
to property, severe personal injury, or death. Follow all
instructions and suggestions in this operators manual as
well as observing normal electrical safety precautions.
Do not use this meter if you are unfamiliar with electrical
circuits and proper test procedures.
GAR_TL_023_0912_GCM-221_Manual.indd 3 9/12/12 4:13 PM