Need help?Do you have a question about the Gardner Denver 8000 Series and is the answer not in the manual?
General| Brand | Gardner Denver |
|---|---|
| Model | 8000 Series |
| Category | Blower |
| Language | English |
Explains the positive displacement mechanism of 8000 Series blowers with two impellers.
Instructions for proper storage of the blower, including duration and protective measures.
Steps to remove rust inhibitors and shipping protection before operation.
Covers site selection, foundation requirements, and safe handling procedures for installation.
Details on installing drive components, ensuring alignment, and managing overhung loads.
Guidelines for connecting and supporting piping systems to the blower for optimal performance.
Information on lubrication types, recommended oils, and sump capacities for proper operation.
Defines critical operating parameters and associated safety warnings for blower use.
Procedures for normal blower operation, including checks and adjustments.
Steps for safely shutting down the blower, including considerations for extended periods.
A guide to identify and resolve problems such as knocking, overheating, or tip drag.
Procedures for inspecting critical internal components like gears and impellers for wear and damage.
Covers determining, setting, and resetting impeller clearances and timing for optimal performance.
Steps for removing timing gears and hubs from impeller shafts.
General guidance on replacing bearings and seals in the blower unit.
Specific steps for servicing bearings and seals in the gear end of the blower.
Instructions for replacing seals and bearings in the drive end, including seal types.
Outlines the scope, limitations, and exclusions of the manufacturer's warranty.
Defines warranty durations for components and the procedure for submitting claims.
Legal statement disclaiming implied warranties and limiting liability.
To Next Page
