Gardner Denver ELECTRA-SCREW EBE FH-25 HP User Manual

GARDNER DENVER

ELECTRA–SCREW

STATIONARY
BASE–MOUNTED & TANK MOUNTED
COMPRESSORS
DOMESTIC MODELS
EBE_DH – 15 HP
EBE_EH – 20 HP
EBE_FH – 25 HP
EBE_GH – 30 HP
INTERNATIONAL MODELS
EBEQEJ – 20 HP (15 KW)
EBEQFJ – 25 HP (19 KW)
EBEQGJ – 30 HP (22 KW)
OPERATING AND
SERVICE MANUAL
13–8–609
5th Edition
March, 1997

Gardner Denver ELECTRA-SCREW EBE FH-25 HP Specifications

General

Brand	Gardner Denver
Model	ELECTRA-SCREW EBE FH-25 HP
Category	Compressor
Language	English

Summary

SECTION 1 GENERAL INFORMATION

COMPRESSOR DESIGN AND OPERATION PRINCIPLES

Explains the rotary screw mechanism, air intake, compression cycle, and air-oil system flow.

SECTION 2 INSTALLATION

SECTION 3 STARTING & OPERATING PROCEDURES

UNIT PREPARATION, STARTUP, AND SHUTDOWN

Guides through pre-operation checks, safe startup sequences, and proper shutdown procedures.

SECTION 4 CONTROLS & INSTRUMENTATION

CONTROL SYSTEM COMPONENTS AND PROTECTIVE DEVICES

OPERATING MODES, INDICATORS, AND READOUTS

Explains operating modes, indicator lights, digital displays, and error message definitions.

SECTION 5 LUBRICATION OIL COOLER, OIL FILTER & SEPARATOR

OIL SYSTEM COMPONENTS AND LUBRICANT REQUIREMENTS

LUBRICANT MAINTENANCE AND OIL CHANGE PROCEDURES

SECTION 6 AIR FILTER

AIR FILTER TYPES AND MAINTENANCE PROCEDURES

SECTION 7 BELT DRIVE

SECTION 8 MAINTENANCE SCHEDULE

ROUTINE SERVICE CHECKLIST AND INTERVALS

Outlines a comprehensive schedule for regular maintenance tasks based on operating hours.