EasyManua.ls Logo

Gardner Denver Elmo Rietschle C-VLR 100 User Manual

Gardner Denver Elmo Rietschle C-VLR 100
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
C
C-Series
C-Series
Claw
Edition: 3.11.2016 · BA 880-EN
Original Operating Instructions
C-VLR 60 | 100 | 150 | 251
Vacuum pump
Question and Answer IconNeed help?

Do you have a question about the Gardner Denver Elmo Rietschle C-VLR 100 and is the answer not in the manual?

Gardner Denver Elmo Rietschle C-VLR 100 Specifications

General IconGeneral
TypeLiquid Ring Vacuum Pump
ModelC-VLR 100
Speed1450 rpm
Nominal flow rate100 m3/h
Ultimate Vacuum33 mbar

Summary

Safety

2.1 Warning instruction markings

Details danger levels (DANGER, WARNING, CAUTION, NOTICE) and their consequences.

2.3 Designated use

Specifies that the machine must only be operated in technically perfect condition and within specific temperature ranges.

2.4 Unacceptable operating modes

Lists prohibited operations, including handling explosive media, non-commercial plants without precautions, and modifications.

2.5 Personal qualifications and training

Stresses that personnel must be qualified, trained, and supervised for installation, commissioning, and maintenance.

2.7 Safety notes for the operator

Provides critical safety advice for operators regarding hot parts, media discharge, electrical risks, and flammable materials.

2.8 Safety instructions for installing, commissioning and maintenance

Details safety procedures for installation, commissioning, and maintenance, emphasizing qualified personnel and securing the machine.

Transport, storage and disposal

3.1.2 Lifting and transporting

Provides warnings and guidelines for safe lifting and transporting using a device or crane.

Set up and operation

4.1.1 Data plate

Explains the information presented on the machine's data plate, including type, serial number, and technical specifications.

4.3 Areas of application

Outlines the operating pressure ranges and applications for C-VLR vacuum pumps.

Installation

5.1 Preparing for installation

Lists critical points to check before installation, such as accessibility, ventilation, and room for maintenance.

5.3 Connecting pipes

Details how to connect suction and exhaust pipes, including warnings about pipe length and exhaust restrictions.

5.4 Control and relief valve

Explains how to set vacuum using the control knob and warns against operating without the valve.

5.5 Filling with lubricating oil

Instructs on filling the gear wheels and oil filling point with lubricating oil up to the sight glass.

Commissioning and decommissioning

Maintenance and repair

Malfunctions: Causes and elimination

Technical Data

Related product manuals