To Next PageTo Next PageWhy Gardol GLH-S-2800 motor does not start?
If the Gardol Paper Shredder's motor isn't starting, it could be due to motor overload. Try turning the shredder on again. Alternatively, there might be an issue with the electricity supply. In that case, have a trained electrician check the socket, cable, lead, and plug.
What to do if Gardol GLH-S-2800 Paper Shredder garden waste is not drawn in?
If garden waste isn't being drawn into your Gardol Paper Shredder, it might be because the blade cylinder is rotating anti-clockwise. To fix this, change the rotational direction. Another reason could be that there is no electricity, in this case push shredding material with special pushing device for shredder. Also, the blade cylinder might be blocked, so remove any blockage.
What to do if Gardol Paper Shredder shredding material is tangled?
If the shredding material is getting tangled in your Gardol Paper Shredder, the counter blade might not be set correctly. Re-adjust the counter blade.
Why Gardol Food Processor motor does not start?
If the Gardol Food Processor's motor isn't starting, it could be overloaded. To resolve this, try turning the shredder on again, referring to the Operation section for guidance. Alternatively, the issue might stem from a lack of electricity. In this case, have a trained electrician inspect the socket, cable, lead, and plug, as outlined in the Electric connection section.
What to do if garden waste is not drawn in Gardol Food Processor?
If garden waste isn't being drawn into your Gardol Food Processor, there are a few potential reasons. First, the blade cylinder might be rotating anti-clockwise. To fix this, change the rotational direction following the instructions in the Operation section. Another possibility is a blockage in the blade cylinder; remove any obstructions as described in the Operation section. Also, ensure that the shredding material is pushed with a special pushing device for the shredder.
How to fix tangled shredding material in Gardol Food Processor?
If the shredding material is getting tangled in your Gardol Food Processor, the counter blade might not be set correctly. You should re-adjust the counter blade, following the instructions in the Operation section.
General| Brand | Gardol |
|---|---|
| Model | GLH-S-2800 |
| Category | Paper Shredder |
| Language | English |
Details the function of the control panel buttons and switches.
Instructions on how to feed material and operate the shredder safely.
Guide on adjusting the counter blade for optimal performance and wear.
Explanation of the overload protection mechanism and how to reset.
Information on identifying and handling damaged power cables to prevent hazards.
Details regarding the AC motor, mains voltage, and extension cable requirements.
Instructions for cleaning the shredder safely, avoiding water and using appropriate methods.
Guidelines for storing the shredder in a safe, dry, and frost-proof environment.
Guidance on disposing of the equipment and packaging according to environmental regulations.
A guide to identify and resolve common faults and issues with the shredder.
Details manufacturer's warranty, scope, and common exclusions for equipment.
Explains how to make a warranty claim, including period, contact, processing, wear parts, and estimates.
Details on reporting apparent defects within 8 days and general warranty exclusions across different languages.
