12
Garrett Metal Detectors
SUPER SCANNER
®
V
13
FACTORY SERVICE
Pack the detector carefully and include full
details concerning its problem as well as your name,
address and telephone number.
Ship to: Garrett Metal Detectors
Service Department
1881 W. State St.
Garland, TX 75042 USA
Allow approximately one week for technicians to
examine and repair your instrument.
DETECTION PRINCIPLES
AND CAPABILITIES
The Super Scanner is an active hand-held metal
detector with very high sensitivity to all metals
including ferrous, non-ferrous and stainless steel.
Detection and alarming takes place when the
instrument is passed in close proximity to metal
objects.
Detection range is dependent upon the size
and conductivity of the metal object. The larger the
object, the greater the detection distance.
The Super Scanner is factory preset to nominal
sensitivity with no operator adjustments required.
This ensures that the detector will be used at the
proper operating level established for the particular
security need.
Should nearby, stationary metal objects (floor
rebar, metal walls or cell bars) cause interference
to the scanning process, an Interference Elimination
Button is available to momentarily reduce sensitivity
so as to ignore the interfering nearby metal and
To Next Page
Loading...