Mealstream Ovens Pt. No. 32Z3403 Issue 15
Page 50
The MenuKey™ System automatically changes all the
cooking programs on the numbered icon pads with the
turn of a key.
To change the menus on the oven:
Ensure the power switch is off.
Lift the MenuKey™ cover in the top panel
of the oven and put the key in the keyhole
Turn the key clockwise to the stop
( ¼ turn ).
Do not remove the key at this stage.
Switch the power switch on.
The oven will now go through the program
download sequence by displaying the
following:
The Key Code
The number of
programs and each
program number on the key.
When the display shows 0:00, the cavity
lights up and the fans start.
Remove the key and close the cover and
the oven is ready to use with the new
programs.
EPS-FAIL-REDO
If the key is removed before
the download is complete or
the process is interupted the
display shows EPS then FAIL
then REDO
Switch oven off and begin the
MenuKey download again.
To confirm the download is successful
Switch off the oven.
Switch on and the display briefly will show the following:
1. The new key code
2. 0:00 (oven ready to use)
example: Key 01
example: 38 programs
1
2
3
APPENDIX 2: MenuKey™ DOWNLOAD PROCEDURE
To Next Page
Loading...
Need help?
General
