Garland ULTIMATE 114 E

Questions and Answers

J
Jeremy WolfeJul 29, 2025
How to troubleshoot Garland ULTIMATE 114 E Pressure Washer when the engine does not start?
- C
  Cheyenne Martin DVMJul 29, 2025
  If your Garland Pressure Washer's engine won't start, first ensure it's properly connected to the mains. If it is, try a different mains switch. If it still fails to start, the cable or switch might be damaged, or the thermal sensor may have activated. For cable or switch issues, take the machine to a service agent. If you suspect the thermal sensor, wait 5 minutes and try again; if it still doesn't start, take it to a service agent.
A
Ashley MorganAug 4, 2025
What to do if my Garland Pressure Washer starts but no water comes out?
- C
  cuevassarahAug 4, 2025
  If your Garland Pressure Washer starts but no water comes out, check if the water is frozen, ensure the tap is open, and clean the lance. These are common reasons for this issue.
B
brownjackAug 10, 2025
Why does the pressure fluctuate or the Garland Pressure Washer vibrate?
- E
  eric13Aug 10, 2025
  If your Garland Pressure Washer experiences pressure fluctuations or vibrates, it might be due to insufficient water flow. Check that the hose is properly connected without leaks. Also, verify that the tap provides enough water flow for the machine's needs and that the filter is clean.
A
Amanda GrayAug 16, 2025
What to do if my Garland ULTIMATE 114 E starts and stops by itself?
- C
  Carrie JohnsonAug 16, 2025
  If your Garland Pressure Washer starts and stops on its own, it could be due to a loss of water in the high-pressure zone. Check the hose and connectors to make sure they are properly in place and not leaking. If you can't find any problems, take the machine to the nearest service agent.
D
David IngramAug 22, 2025
Why does my Garland ULTIMATE 114 E Pressure Washer keep stopping?
- A
  Antonio DuranAug 22, 2025
  If your Garland Pressure Washer stops, it might be due to the thermal sensor being activated or a blocked lance. Try waiting 5 minutes and try again. Also, clean the lance.

Summary

Introduction

Security Precautions and Normative

User Eligibility and Restrictions

Machine designed for adults who have read and understood the manual; prohibits use by minors, untrained individuals, or those with diminished capacity.

Personal Safety Measures

Be alert and vigilant, avoid distractions, do not use when tired or under influence, avoid accidental start-up, maintain balance, use protective equipment.

Work Area Safety

Protect electrical conductors from water, maintain clean and well-lit area, avoid explosive atmospheres, keep children/onlookers away.

Electrical Safety Guidelines

Do not touch mains/cables with wet hands, connect to 230V/50Hz, avoid earthed surfaces, do not expose to rain/humidity.

Usage and Care Instructions

Use only for domestic cleaning, do not use on people/animals/fragile objects, keep 30cm distance, avoid flammable liquids.

Machine Service and Maintenance

Periodically service by authorized dealer using original spare parts to maintain security and function.

Warning Symbols

General Danger and Attention Symbol

General danger and attention warning symbol.

Read Manual and Follow Warnings Symbol

Symbol indicating to read the instruction manual and follow security warnings.

Electric Shock Hazard Symbol

Symbol indicating risk of electric shock.

Water Direction Hazard Symbol

Symbol warning not to direct water at people, animals, or electrical supplies.

Correct Extension Cable Usage Symbol

Symbol indicating use of specific electric elongators with minimum section and length.

Machine Descriptions

Machine Usage Environment

Machine designed for domestic use, pumping water at high pressure within specified temperature and humidity.

Machine Component Overview

Lists and illustrates components of the high pressure machine, including switches, wheels, hoses, gun, etc.

Technical Specifications

Provides detailed technical data including brand, model, power, voltage, pressure, flow rate, noise levels, and weight.

Start Up Instructions

Included Materials List

Lists all elements included in the box for the high pressure machine.

Machine Assembly Guide

Step-by-step instructions for assembling the machine, including attaching handle, cable support, hose, and gun.

Pre-Use Verification Checks

Checks for loose pieces, damages, correct electrical and water connections before operation.

Starting and Stopping Procedures

Instructions on how to start and stop the machine, including safety features and operation of the trigger and switch.

Post-Use Verification

Check for leakages after use and tighten or repair parts if necessary.

Usage of the Machine

Stopping Machine Usage

Procedure for safely stopping the machine, including disconnecting water and power, and emptying residual water.

Maintenance and Service

Routine Maintenance Tasks

Includes cleaning connectors, detergent deposit, lance, and entry filter for proper machine function.

Troubleshooting

Engine Does Not Start

Troubleshooting steps for when the engine fails to start, covering connection, switch, cable, and thermal sensor issues.

Pressure Fluctuates or Vibrates

Diagnosing and resolving issues with fluctuating pressure or machine vibrations, checking water flow and filter.

Machine Stops

Addressing the problem of the machine stopping unexpectedly, usually due to thermal sensor activation or blocked lance.

Machine Starts and Stops

Troubleshooting intermittent starting and stopping, checking for water loss or leaks in the high pressure zone.

No Water Comes Out

Resolving issues where the machine starts but no water is dispensed, checking for frozen water, closed tap, or blocked lance.

Transport

Transport Guidelines

Instructions for safely transporting the machine, including disconnecting power, securing it, and handling weight.

Storage

Storage Guidelines

Recommendations for storing the machine safely, clean, on a flat surface, away from children, and within temperature limits.

Warranty Conditions

Warranty Period

Details the warranty period of 2 years and coverage for manufacturing defects.

Exclusions

Lists items not covered by the warranty, such as wear and tear, misuse, negligence, and unauthorized modifications.

Territory

Specifies that the Garland warranty covers the country where the product was purchased.

In Case of Incidence

Information on how to handle warranty claims, requiring correct documentation and the purchase invoice.