tuned specifically for
spearfishers. Start and
stop tones are disabled.
Dive Setup
You can customize the dive
settings based on your
needs. Not all settings are
applicable for all dive modes.
You can also edit the settings
before you start a dive.
Hold UP, and select Dive
Setup.
See the owner's manual for
more information.
Starting a Dive
1
From the watch face,
select
.
2
Select a dive mode
(page 10).
3
If necessary, select
DOWN to edit the dive
settings, such as the
gases, water type, and
alerts.
4
Select .
5
Descend to start your
dive.
The activity timer starts
automatically when you
reach a depth of 1.2 m (4
ft.).
6
Select DOWN to scroll
through the data screens
and dive compass.
12 Quick Start Manual
To Next Page
Loading...
Need help?
General
Weight and Dimensions
