Need help?Do you have a question about the Garmin ECHOMAP ULTRA 2 and is the answer not in the manual?
General| Display Resolution | 1280 x 800 pixels |
|---|---|
| Touchscreen | Yes |
| Water Rating | IPX7 |
| NMEA 0183 Input Ports | 1 |
| NMEA 0183 Output Ports | 1 |
| NMEA 2000 Compatible | Yes |
| Bluetooth Connectivity | Yes |
| Mounting Options | Flush or bracket mount |
| Transmitter Power | 500W (RMS), 4000W (peak to peak) |
| Sonar Frequencies Supported | Traditional: 50/77/83/200 kHz |
| Radar Compatibility | Yes (via Garmin Marine Network) |
| Preloaded Maps | BlueChart g3 (depending on the model) |
| Wireless Connectivity | Yes |
| Networking | Yes |
| MicroSD Card Slot | Yes |
Provides steps to connect the mobile device to the chartplotter.
Guides on updating device software via the ActiveCaptain app.
Explains how to download and transfer chart updates using the app.
Details the process of setting up a Wi-Fi network on the chartplotter.
Explains wireless sharing between compatible ECHOMAP devices.
Provides solutions for common wireless connection issues.
Explains how to obtain and use detailed chart data.
Details the process of activating marine chart subscriptions.
Explains how to set a course and navigate to a selected point on the chart.
Guides on creating maps with contours and depth labels using the feature.
Guides on setting and following a direct course to a destination.
Explains setting autopilot to maintain a bearing relative to wind angle.
Details how to engage apparent or true wind hold with a wind sensor.
Explains the high-frequency sonar for detailed fishing environment views.
Describes the sonar technology showing what lies to the sides of the boat.
Introduces Panoptix sonar views for real-time underwater imaging.
Explains how to set alarms for shallow water, deep water, and fish detection.
Guides on installing and configuring transducers for optimal sonar performance.
Notes that autopilot systems require installation by a qualified marine installer.
Guides on how to engage the autopilot to steer the boat and maintain heading.
Guides on wirelessly connecting the chartplotter to a Garmin Force trolling motor.
Details settings for compass calibration, anchor gain, and navigation gain.
Outlines various engine data settings like trip, maintenance, and trim assist.
Guides on setting an alarm for low onboard fuel levels.
Guides on connecting a compatible inReach device to the chartplotter.
Details using the SOS function with an active satellite subscription.
Guides on initiating an SOS call using the chartplotter.
Introduces Skyhook, Drifthook, and Bowhook functions for anchor control.
Details setting stereo to adjust volume automatically based on vessel speed.
Explains GPS satellite information and settings like source and speed filter.
Explains setting parameters for Auto Guidance path calculations.
Guides on resetting device and station settings to factory defaults.
Guides on connecting the power cable, including wire connections and fuse.
Provides critical safety warnings before transducer placement.
To Next Page
