Garmin GDL 69/69A User Manual (English)

Questions and Answers:

S
Sergio CastilloJul 31, 2025
What to do if there is no audio output from my Garmin GDL 69/69A GDL 69A?
- T
  Thomas NguyenJul 31, 2025
  If you're experiencing no audio output from your Garmin GDL 69A Receiver, here are a few things to check: * First, make sure that your unit is a GDL 69A and not a GDL 69, as the latter does not have an audio feature. * Verify the wiring of the audio suppression input, ensuring it's correctly connected to the active high or active low input sense. * Check the wiring from the GDL 69A to the audio panel. * Confirm that the 'Mute' function is not enabled. * Try increasing the volume by pressing the Volume Up button. * If audio is only outputting on Channel 1, verify that your audio XM service has been activated.
T
Tanya CastilloAug 5, 2025
Why is the XM signal low quality or not working on my Garmin Receiver?
- S
  Stephanie JamesAug 5, 2025
  If you are experiencing a low quality or no XM signal on your Garmin Receiver, consider the following: * Ensure that the XM antenna has a clear, unobstructed view of the satellite constellation. * Check the antenna cable and connectors for any damage or loose connections. * Verify the correct antenna loss value is set in the configuration module. * Confirm that the antenna ground plane is adequate.
S
Sarah SanchezAug 12, 2025
What to do if my Garmin GDL 69/69A displays incorrect or no XM subscribed services?
- T
  Tracy BatesAug 12, 2025
  If your Garmin Receiver is not displaying the correct XM subscribed services, or showing no services at all: * First, verify your subscription status with XM Satellite Radio. * Also, it's possible that the GDL 69/69A unit was not properly activated.
C
Chad BatesAug 17, 2025
Why doesn't XM audio mute on my Garmin GDL 69A Receiver when stall or gear inputs are activated?
- C
  cantrelllisaAug 17, 2025
  If the XM audio entertainment on your Garmin GDL 69A Receiver does not mute when audio suppression interfaced inputs (stall, gear) are activated: * Verify the wiring of the audio suppression inputs. * Verify the alarm activation state of warning active high and active low.
K
Kenneth RodriguezAug 25, 2025
How to fix 'No communication with GDL 69/69A' on my Garmin Receiver?
- P
  Patrick TateAug 25, 2025
  If your Garmin Receiver is not communicating with the GDL 69/69A, you should: * Check the power wiring and pin out. * Verify the correct communication port setting on the display/control device.

Garmin GDL 69/69A Specifications

General

Subscription Required	Yes
Operating Temperature	-20°C to +55°C
Type	Satellite Weather Receiver
Service	SiriusXM Satellite Weather
Antenna	External antenna required
Coverage	North America
Compatibility	Compatible with select Garmin aviation displays