Garmin GPS 17x HVS User Manual

EN
GPS 17x NMEA 0183 HVS Installation Instructions
The Garmin GPS 17x NMEA 0183 HVS high-sensitivity GPS antenna provides position
information over NMEA 0183. The GPS 17x NMEA 0183 HVS can be connected to a Garmin
chartplotter or a NMEA 0183-compliant device.
The GPS 17x antenna must be properly installed according to the following instructions.
You need the appropriate fasteners, tools, and mounts listed in each section. These items
are available at most marine dealers. Always wear safety goggles, ear protection, and a dust
mask when drilling, cutting, or sanding. When drilling or cutting, always check what is on the
opposite side of the surface.


www.garmin.com/support/

: See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
Product Registration
Help us better support you by completing our online registration at www.garmin.com/
registration/.
For future reference, write the serial number assigned to your GPS 17x in the space provided. It
is located on a sticker on the back of the unit.
Serial number
Packing List and Accessories
Before installing your unit, conrm that your package includes the following items. If any parts
are missing, contact your Garmin dealer immediately.
Standard Package
GPS 17x Antenna
Surface-mount bracket
Pole-mount bracket
Under-deck-mount bracket
Mounting hardware (screws and adhesive pads)
Power/data cable
Installation instructions
•
•
•
•
•
•
•
Tools Needed
Drill
Drill bit—surface-mount pilot-holes (see table)
Drill bit—3/4 in. (19 mm) pole-mount cable-
hole
Hole saw, 1 in. (25 mm)—surface-mount
cable-hole
Screwdriver—surface mount screws
Center punch and hammer
(to mark surface-mount pilot holes)
Countersink bit (when mounting on berglass)
Marine sealant (for some mounting options)
•
•
•
•
•
•
•
•
Material Material Thickness
(in.)
Material Thickness
(mm)
Hole Size
(in.)
Hole Size
(mm)
Hole Size
(Drill Number)
Aluminum
alloy sheet
metal
from
1
/
32
to
5
/
64
from 0.76 to 2.03 .128 3.25 30
from
3
/
32
to
3
/
8
from 2.28 to 9.52 .147 3.73 26
Fiberglass—all thicknesses .140 3.56 28
High Density Plastic—all thicknesses .125 3.17
1
/
8
Plywood (resin impregnated)—Professional installation
recommended
.144 3.66 27
Pilot Hole Size Table
December 2009 190-00885-90 Rev. C Printed in Taiwan

Garmin GPS 17x HVS Specifications

General

Compatibility	GMI 10 GPSMAP 6012 / 6212 / 7012 / 7212 / 4008 / 4010 / /4012 / 4208 / 4210 / 4212 / 5008 / 5012 / 5015 / 5208 / 5212 / 5215 / 6008 / 6208 / 7015 / 7215
Product color	White
I/O ports	NMEA 0183

Summary

Getting Started

Product Registration and Serial Number

Register your GPS 17x online and record its serial number for future reference.

Packing List and Tools

Confirm included package items and identify necessary tools for installation.

Step 1: Mount the GPS 17x Antenna

GPS 17x Placement Considerations

Guidance on selecting an optimal location for best reception and avoiding interference.

Surface-Mounting the GPS 17x Antenna

Detailed instructions for mounting the GPS 17x antenna on a flat surface.

Pole Mounting the GPS 17x Antenna

Procedures for attaching the GPS 17x antenna to a standard marine pole mount.

Under-Deck Mounting the GPS 17x Antenna

Instructions for mounting the GPS 17x antenna under a fiberglass surface using adhesive pads.

Step 2: Connect the GPS 17x to Power and Data

GPS 17x Wiring Diagrams

Diagrams illustrating correct wiring for power and NMEA 0183 connections.

Two-Way Communication Wiring

Specific wiring instructions for devices requiring two-way NMEA 0183 communication.

Step 3: Update and Specifications

Updating Chartplotter Software

Ensuring compatibility by updating your Garmin chartplotter software.

GPS 17x Specifications

Technical specifications for the GPS 17x antenna, including dimensions and power.

Compliance and Licensing

Declaration of Conformity

Statement of compliance with essential requirements and relevant provisions.

Software License Agreement

Terms and conditions for using the embedded software in the GPS 17x device.