EasyManuals Logo

Garmin GPSMAP 7212 Technical Reference

Garmin GPSMAP 7212
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Technical Reference for Garmin NMEA 2000 Products 37
NMEA 2000 Checklist
Conguring the Wind Angle Filter
The wind angle lter governs how quickly the NMEA 2000-compatible display device shows a change in the wind angle. A lower lter setting
shows changes in the wind angle more gradually, and may stabilize the display.
To congure the wind angle lter:
1. While viewing the NMEA 2000 device information, select Cong > Wind Angle Filter.
2. Choose from the following options to adjust the lter settings.
Off—the wind angle data is not ltered.
On—select a lower number to update the display device less often, and help the gauge needle or wind angle number to move or change
more steadily.
Auto—automatically adjusts the lter settings based on wind conditions.
Conguring the GWS 10 if the Filter and Offset Selections Are Not Displayed
Depending on the version of software loaded on your Garmin marine instrument, the specic conguration options may not be displayed on the
conguration screens.
To congure the wind angle offset if the menu option is not displayed:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “ANGLEOFFSET=”
3. Follow the command with a number between 0 and 359, in degrees (for example: ANGLEOFFSET=180).
To congure the wind angle lter if the menu option is not displayed:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “ANGLEFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting (for example: ANGLEFILTER=12).
To congure the wind speed lter:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “SPEEDFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting (for example: SPEEDFILTER=215).

Other manuals for Garmin GPSMAP 7212

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin GPSMAP 7212 and is the answer not in the manual?

Garmin GPSMAP 7212 Specifications

General IconGeneral
BrandGarmin
ModelGPSMAP 7212
CategoryMarine GPS System
LanguageEnglish

Related product manuals