Garmin Que - User Manual

Questions and Answers

J
justinmorseAug 2, 2025
What to do if Garmin Que Software says 'Select Street Before Searching'?
- K
  Kenneth BurtonAug 2, 2025
  If you receive a 'Select Street Before Searching' message on your Garmin Software, it means you've tried to search for an address without entering the street name first. Enter a street name before beginning your search. Similarly, the 'Select Two Streets Before Searching' message indicates that you have not entered both street names when searching for an intersection; enter both street names to complete the intersection description. If you see a 'None Found' message, try a variation of the item description, as the loaded maps may not contain data matching your entry.
D
Dennis GreenAug 10, 2025
Why does my Garmin Que Software say 'Can’t Unlock Maps'?
- M
  Meredith AguilarAug 10, 2025
  If you encounter a 'Can’t Unlock Maps' message with your Garmin Software, ensure that you enter the unlock code during MapSource installation, following the instructions on the setup disk. A 'Detailed Maps Don’t Support Routing' message indicates that the maps you're using aren't designed for auto-routing; select maps specifically designed for this purpose. Finally, if you see a 'Too Many Maps on Data Card' message, the map sets you're trying to load are too large for the available space. Check the space available and either choose a location with more space or reduce the map set size.
J
Joshua TaylorAug 17, 2025
How to fix Garmin Que 'None Found' message in Find Feature?
- H
  Hunter ArmstrongAug 18, 2025
  If you find that no items are listed for 'By Name' options in the Find Feature or receive a 'None Found' message when accessing Man-made Places, Water Features, or Land Features Find Options on your Garmin Software, it could be due to the type of maps installed. Ensure that maps supporting the desired options are installed from MapSource, such as City Select version 6.5. Also, remember that these options primarily display data from topographic maps and marine charts; load maps of this type using MapSource topographic and marine chart map data.
T
Thomas JordanOct 25, 2025
Why does my Garmin Que Software say 'No GPS Connected'?
- D
  Diane MartinezOct 25, 2025
  If you're seeing a 'No GPS Connected' or similar message on your Garmin Software, or having trouble maintaining a satellite signal, here's what to check: * Ensure the connection to the GPS receiver or PDA is active using Que Prefs or the Que menu. * Verify the GPS receiver is turned on and has sufficient power, connecting a power source or charging the battery if needed. * If using a wireless receiver, make sure it's within range of the PDA. * Allow time for the GPS receiver to collect satellite data, and if the signal is unstable, try moving to a location with less interference. Also, ensure the antenna is optimally positioned for best reception. Bear in mind that some car windshields with metallic coatings can block satellite signals. Also, GPS receivers may not work well insid...