Calibrating the Drop Scale Factor
Garmin
®
recommends you calibrate the muzzle velocity prior to the drop scale factor.
Calibrating the drop scale factor provides a more accurate solution at or beyond the transonic range for your
specific firearm.
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > Calibrate DSF.
3 Select an option:
• Select Range to edit the range.
• Select True Drop to edit the drop distance.
4 Select .
Viewing the Drop Scale Factor Table
The drop scale factor table is populated after you calibrate the drop scale factor. If necessary, you can reset the
table values to zero.
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > View DSF Table.
3 If necessary, hold MENU, and select Clear DSF Table.
The table values reset to zero.
Editing the Muzzle Velocity and Temperature Table
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > MV-Temp Table.
3 Hold MENU.
4 Select Edit.
5 Press DOWN or UP to scroll through the table.
6 Press START to edit a value.
7 Press BACK to save your changes.
8 Press BACK.
9 Select Muzzle Velocity > Enable MV-Temp to set the muzzle velocity using the temperature table.
Clearing the Muzzle Velocity and Temperature Table
1 From the Applied Ballistics app, press START.
2 Select Profile > Gun Properties > MV-Temp Table.
3 Hold MENU.
4 Select Clear MV-Temp.
42 Applied Ballistics
®
To Next Page