Customized
For highly experienced users, the app offers the option to send data to the user's own server. The
settings should be intuitive, please contact us if necessary.
Connecting the main unit to a wireless Wi-Fi network - iOS
1) Make sure your mobile device is connected to the Wi-Fi network
2) Download the WS View app to your mobile device from Apple App Store
3) Run the app
Note: If you have a dual band modem, make sure that you connect the device to a network
operating at 2.4 GHz.
Click on the gear icon in the
upper left part of the screen
and select “Configure a New
Device”
Select the device in the upper
left corner and click on NEXT
Connect (or disconnect and
reconnect) the power adaptor
to the main unit. Hold the
WIND and PRESSURE
buttons simultaneously for 5
seconds.
“M-B” will flash at the top of
the display.
Check “Completed operation”
and click on NEXT
To Next Page
Loading...
