GARO TWIN+ - Service and Maintenance

USER MANUAL
Service / Maintenance
The service must be performed by a professional electrician.
A service form can be found at www.garoemobility.com
In order for the warranty to apply, it is required that a completed
service form/forms, (depending on the age of the product), can
be presented when contacting GARO support or other Garo
support partners.
The most recent service form may not be older than 12 months.
Service is performed by visual inspecting both outside and inside
of theTWIN+, conditioning of components as well as functional
tests. Specific service points can be found in the service form.
If your TWIN+ is connected to Backend Operator or other
external supervised system, GARO recommends that you contact
the operator, to plan the service in advance, in order to avoid
unnecessary errors and warning messages that could lead to
expensive emergency call outs from other service partners. You
can normally find information inside the TWIN+ if it is connected
to a supervised system.
Any questions regarding service, please contact GARO at
support@garo.se
YOU WILL NEED FOLLOWING DURING SERVICE:
• Service form + pen
• Key to the front door
• Torx tools and PZ2 screwdriver
• Cleaning cloth
• Test instrument/equipment for EVSE:s, for example GARO
article 352344
19
EN