Need help?Do you have a question about the Garrard ZERO 100 and is the answer not in the manual?
Step-by-step guide for installing and aligning a pickup cartridge into the arm carrier.
Explains connecting the mains power lead and ensuring proper safety earth connections for various models.
Guide to setting the correct stylus pressure and adjusting the anti-skate bias compensation.
Instructions for adjusting the pickup arm's lowering and lifting heights for optimal performance.
Diagnosing and correcting issues related to turntable starting, speed accuracy, wow, and flutter.
Troubleshooting issues with record dropping and pickup arm tracking incorrectly.
Covers faults related to arm landing, lowering, and automatic return functions.
Addresses common noise issues like rumble, hum, and crackles through fault diagnosis.
Troubleshooting the automatic switch failing to turn off or switching off prematurely.
General| Motor | 4-pole synchronous |
|---|---|
| Overhang | 15mm |
| Speeds | 45 RPM |
| Tonearm Type | Zero Tracking Error |
| Cartridge | Not included |
| Platter | Aluminum |
| Auto Functions | Auto Return |
| Tonearm | Zero Tracking Error |
| Tracking force | 3 grams |
To Next Page
