minimize
-
Labeling
When removing refrigerant from a system, either for servicing or decommissioning, it is recommended
that all refrigerants are removed safely. When transferring refrigerant into cylinders, ensure that only
appropriate refrigerant recovery cylinders are employed. Ensure that the correct number of cylinders
for holding the total system charge is available. All cylinders to be used are designated for the recovered
refrigerant and labeled for that refrigerant (i.e. special cylinders for the recovery of refrigerant). Cylinders
hall be complete with pressure relief valve and associated shutoff valves in good working order. Empty
recovery cylinders are evacuated and, if possible, cooled before
To Next Page
Loading...
