Need help?Do you have a question about the GAS GAS TXT RACING 300 and is the answer not in the manual?
General| Brand | GAS GAS |
|---|---|
| Model | TXT RACING 300 |
| Category | Motorcycle |
| Language | English |
Defines the intended purpose and usage limitations of the vehicle.
Explains different levels of risk (Danger, Warning, Caution, Note) and their corresponding symbols.
Warns against tampering with noise control systems and lists prohibited acts.
Covers essential safety practices for operating the motorcycle and rider fitness.
Emphasizes the importance of wearing appropriate protective clothing for rider safety.
Offers crucial advice and safety warnings for the initial operation of the motorcycle.
Lists essential pre-ride checks to ensure safe operation.
Explains gear shifting techniques and general riding practices.
Covers braking techniques, warnings about brake system performance, and surface conditions.
Details the safe procedure for refueling, including fire and poisoning hazards.
Continues refueling instructions, specifying fuel type, capacity, and mixture ratio.
Explains how to adjust suspension based on rider weight for optimal handling.
Guides on adjusting the rear shock absorber's rebound damping for desired ride characteristics.
Details how to adjust the rear shock absorber's compression damping for GP models.
Describes the procedure to measure rear wheel unloaded dimension for sag calculation.
Explains how to measure the static sag of the rear shock absorber.
Provides instructions for adjusting the rear shock absorber's spring preload.
Guides on how to measure the riding sag of the rear shock absorber.
Details the steps to adjust the riding sag of the rear shock absorber.
Continues adjusting riding sag, including spring rate selection.
Explains basic fork settings and considerations for bottoming out.
Guides on adjusting the front fork's rebound damping for optimal front-end feel.
Provides instructions for adjusting the front fork's spring preload.
Details how to adjust the fork's fluid barrier for end-position damping and puncture resistance.
Explains how to adjust the front fork's compression damping for GP models.
Provides instructions on how to adjust the steering head bearing play.
Continues adjustment of steering head bearing play, including torque specs.
Details how to adjust the drive chain tension using the eccentrics.
Continues adjusting chain tension, including rear wheel alignment.
Provides instructions for changing the hydraulic clutch fluid.
Continues the process of changing hydraulic clutch fluid, including bleeding.
Guides on adjusting the front brake lever's free travel.
Details how to adjust the front brake lever's position for rider comfort.
Explains how to check the front brake fluid level and potential issues.
Details how to add front brake fluid, including safety warnings.
Continues instructions for adding front brake fluid.
Describes how to check the minimum thickness of front brake linings.
Continues checking front brake linings for wear and damage.
Provides instructions for changing the front brake linings.
Continues instructions for changing front brake linings, including fluid addition.
Explains how to check the thickness and condition of the brake discs.
Continues checking brake discs for wear and damage.
Guides on adjusting the rear brake lever's basic position.
Continues adjusting rear brake lever position.
Explains how to check the rear brake fluid level and potential issues.
Details how to add rear brake fluid, including safety warnings.
Continues instructions for adding rear brake fluid.
Describes how to check the minimum thickness of rear brake linings.
Continues checking rear brake linings for wear and damage.
Provides instructions for changing the rear brake linings.
Continues instructions for changing rear brake linings, including brake caliper and fluid levels.
Continues changing rear brake linings, caliper positioning and fluid addition.
Continues changing rear brake linings, focusing on brake cylinder and fluid reservoir.
Details how to check tire pressure for street and off-road use.
Continues checking tire pressure.
Guides on checking coolant level and antifreeze concentration, with warnings.
Continues checking coolant and antifreeze levels.
Explains how to check the free play in the throttle cable.
Guides on adjusting the throttle cable play for proper operation.
Continues adjusting throttle cable play.
Explains carburetor tuning based on throttle slide position and component effects.
Continues carburetor tuning, detailing influence of slide adjustment and clip positions.
Discusses the importance of correct carburetor idle speed settings.
Provides detailed steps for adjusting the engine's idle speed.
Continues idle speed adjustment, including troubleshooting for incorrect settings.
Guides on adjusting the shift lever's basic position for proper shifting.
Explains how to check the engine's gear oil level.
Continues checking gear oil level.
Guides on adding gear oil to the correct level.
Provides instructions for changing the engine gear oil.
Continues changing gear oil, including drain plug and refilling.
Lists possible causes and actions for an engine that fails to start.
Addresses issues related to the engine not maintaining idle speed.
Lists causes and solutions for engine overheating.
To Next Page