Need help?Do you have a question about the GAS PRO Series and is the answer not in the manual?
General| Damping factor | >100 |
|---|---|
| S/N ratio | >90 dB |
| Input sensitivity | 0.2V - 6V |
| Fuse | 25A x 2 |
| Amplifier Class | Class AB |
| Low pass filter | 50Hz - 250Hz |
Provides essential advice and considerations for locating the amplifier securely and safely within the vehicle.
Details requirements for vehicle electrical system, grounding, and proper cable management for optimal amplifier performance.
Explains amplifier's input sensitivity, crossover controls, and phase shift adjustments for sound tuning.
Covers Bass Boost and Subsonic Filter functions for shaping low-frequency audio output and protecting speakers.
Guides on connecting speakers to the multi-channel amplifier's output terminals, emphasizing correct wiring.
Details on running power and ground cables, ensuring proper connection to the battery and chassis for safety and performance.
Instructions for connecting RCA cables, remote turn-on wire, and speaker wires to the amplifier and speakers.
Guidance on initial power-on, checking controls, and performing system tuning with the head unit volume and amplifier gain.
Illustrates typical remote-on and power wiring configurations for various amplifier models.
Troubleshooting steps for amplifiers that fail to power up or repeatedly trigger protection modes.
Addresses common audio issues like hiss, engine noise, distorted sound, and squealing from speakers.
Diagnoses common causes of amplifier overheating and suggests solutions like checking impedance and airflow.
To Next Page
