Thank you for purchasing a GAS PRO series high audio performance amplifier.
GAS PRO series amplifiers are using the latest technology design. This
series of amplifiers contains Class D\Class AB architecture that significantly
improves efficiency Timbre is exquisite delicate, ,lowers heat output and
current draw. Don't be fooled by the small size.Class D amplifiers make more
power for There size then traditional designs making installation a breeze
without compromising storage space.
If you do not have experience with automotive electronic and mechanical
systems contact a professional installer. Paying a qualified installer is almost
always cheaper th n paying a dealership to repair your car.a
1 2
Running Cables
Carefully run the power and signal cables through the passenger compartment
of the vehicle. Always use a rubber grommet to prevent the power wire from
shorting and to reduce the risk of fire. Depending on which of the GAS PRO
amplifiers you are connecting, use the right size of power and ground wires.
We recommend a fuse to be installed on the power wire within 30-40cm of the
battery for safety.
To Next Page
Loading...