Gas Detection
● Natural Gas
● Propane
● Butane
● Methane
● Ethane
● Steam
● Acetone
● Alcohol
● Hydrogen
● Ammonia
● Gasoline Vapor
● Sulfide
● Organic Solvent Vapor
● Paint Thinner
● Naphtha
● Volatile Industrial Solvent
Maintenance
Replacing the Battery:
- If the “Ready” light is Yellow, the GasKnight Pro is low on battery and it is recommended to replace
the batteries as soon as possible.
- If the “Ready” light is not illuminated, the battery has expired and you must replace the batteries in
order for the unit to work.
Cleaning & Storage
- Use only the fresh water to clean the plastic exterior of the product.
- Only attempt to clean the sensor if you notice that it is dirty and if the detector is not working properly.
The sensor aperture should be cleaned only with a soft brush.
- DO NOT clean the detector with any cleaning products or erosive liquids such as alcohol etc.
- DO NOT store the GasKnight Pro in any of the following environments as this will negatively affect the
sensor life and performance of the unit.
o Extremely Hot or Cold (ideal storage temperature is around 70℉ or 21℃)
o Exposed to Direct Sunlight
o Humid (ideal storage humidity is 30-50%)
o Excessively Dusty or Dirty
o Smoky
o Chemical Dense (i.e. salt or sulfur)
Warranty
1-year manufacturer warranty + 1-year extension is available if you sign up at
www.Warranty.GasKnight.com.
Note: GasKnight reserves the right not to grant warranty claims in the event of any of the following:
Unauthorized disassembly of the product, improper transportation or storage, damage caused by the customer,
and failure to provide proof of purchase.
Product Specifications:
To Next Page
Loading...