3. Unscrew ignition cap and place a Battery (Size: AA) into place with
the (+) end facing outwards. Screw cap back on. Upon pressing the
ignition button, you should hear a clicking sound.
4. For Manual Ignition, use a match placed onto end of match holder.
STEP 1
Unscrew ignition cap and place a Battery (size AA) into
place with the (+) end facing outwards. Screw cap back
on. Upon pressing the ignition button, you should hear a
clicking sound.
STEP 2
For manual ignition, use a match placed onto the end of
match holder.
STEP 3
Plug the power cord into a power outlet and turn ON.
To avoid damage to the power cord, make sure it is
kept away from the product when in use.
STEP 4
Turn the light power switch on. The blue lights above
the control knob will illuminate, along with the lights in
the hood.
To Next Page
Loading...
