60
4. Press the -button once. The machine will commence normal pour function, and
-button surround will begin to flash.
5. When the desired amount of espresso has poured into the cup, press the
-button to
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantityandexitedprogrammingmode.
6. The
-button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings, or overridden by the manual function.
PROGRAMMING DOUBLE ESPRESSO
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1. Prepare to make a two cup of espresso by following steps 2 to 6 in ›Dual Wall Filters for
Beginners‹.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep once and
the program button will begin to flash. This indicates the machine is in programming mode.
4. Press the
-button once. The machine will commence normal pour function, and the
-button surround will begin to flash.
5. When the desired amount of espresso has poured into the cup, press the
-button to
stop the pour. The machine will beep twice, indicating it has saved your preferred pour
quantityandexitedprogrammingmode.
6. The
-button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings), or overridden by the manual function.
RESETTING DEFAULT VOLUMES
Toresetthemachinetothedefaultoneandtwoshotpourquantities,pressandholdthe
PROGRAM-button until the machine beeps three times. Release button. This indicates the
machine has returned to its original default settings.
MANUAL FUNCTION
The Manual function over-rides the preset shot size for one time only. It does not save the
shot size like in programming mode. Press and hold the
-button or -button. Release
the button once sufficient espresso has flowed into the cup.
To Next Page
Loading...
