2. Turn on Bluetooth® communication on your device.
3. Connect the battery to the unit.
4. Launch the GCS app and accept all required permissions.
5. Tap “ ” on the app's home screen.
6. Find your unit on the device list.
If the unit does not appear on the list, pull the screen down to refresh the list, or select the "Refresh scan" option
7. Scan or manually enter the PIN code found on the included stickers.
8. Update the firmware of your ETU:
TITAN II Bluetooth version 0.1-90 or later
ASTER II Bluetooth version 0.1-10 or later
Caution
The first generation of ASTER and TITAN systems does not support the configuration of the G5 Brushless Motor.
9. Open the "This Device" tab.
To Next Page
Loading...