■
DO NOT twist the gooseneck
more than 90 degrees.
■
DO NOT drop this unit. Impact
of any kind can result in damage.
■
DO NOT put water, solvent or any
other liquids on this unit.
■
DO NOT leave this unit in a
dusty environment.
MICROPHONE HEAD:
Two small holes on rear side should
be directed towards belt.
FLEXIBLE GOOSENECK:
Enables convenient and effective
positioning of microphone for
measurement.
BACKLIT DISPLAY:
Bright display, suitable for all light
conditions.
BUTTONS
POWER, MEASURE, RANGE:
Simple and intuitive interface.
POWER SUPPLY
2 X AAA BATTERIES
Supplied with silicone case for
comfortable grip.
350C SONIC TENSION METER
WARNINGS
■
DO NOT leave this unit where it
will get hot, such as in a car or in
direct sunlight.
■
DO NOT use volatile solvents to
clean this unit.
■
DO NOT use this in an area
where a spark could cause
an explosion.
■
DO NOT pull hard on the cord of
the sensor (microphone) from
either end.
■
DO NOT use this unit outside
during a thunderstorm, turn off
power and seek a safe place.
Non-compliance could result in
electric shock from thunderbolt.
■
DO NOT bend the flexible arm
sensor (microphone) within 20
mm (3/4 inch) of either end,
because the construction is
tubular, and the flexible arm
sensor should not be bent at
sharp angles.
350C SONIC TENSION METER
GATES
3
GATES.COM
WARNINGS & SONIC TENSION METER PARTS
To Next Page
Loading...
Need help?
General
